Skip to Content

jiyi uav p2 pro
I bought this flight controller before it was actually in production. I worked with Amanda Gee who month after month convinced me not to complain to PayPal or to cancel my order. I finally received the controller but it did not do everything claimed or at least there was no documentation to support these functions. After more than a year the issue appears to be a support issue. The Android app is only available if you ask for it.  Recently I found instructions for the follow me at which I have included below.  I am also including info on the on screen display (OSD) unit. 

P2 Pro Flight Controller User Manual V1.00 click here
P2pro Assistant Software, 5-4-15,, 34.1MB click here
 OSD Instructions click here
Android app click here
JIYI Android Mobile Ground Station Manual v1.01 click here

The P2 Pro Multirotor AutoPilot Flight Control System.

The pro version now includes one key take off and landing, set point landing, waypoint flights and can also support octocopters with a diameter up to 1200mm making it the perfect solution for large aerial photography / videography multirotor platforms.

The P2 Pro system is suitable for multirotors with a maximum diameter of 1200mm and suits many of the commonly used multirotor configurations including, octocopters, X type quads and hexcopters.

The system offers superior stability and precise spot hovering making it perfect for your aerial photography and videography. With several flight modes the P2 Pro system covers a multitude of flying styles from novice to the budding aerial photographer and advanced sport flyer.

The P2 Pro system offers USB connectivity and is compatible with windows XP, SP3 and Windows 7, which will allow you to configure and fine tune your multirotor. The V2 version has revised firmware for improved overall performance.


  • Supports airframes I4, X4 / hexcopter I6, X6, IY6, Y6 / I8, X8, V8,
  • Supports PPM, PWM and SBUS receivers (minimum 6 channels)
  • Provides superior stability and precise spot hovering
  • One key take off and landing, set point landing and waypoint flights
  • Perfect for frames up to 1200mm diameter  
  • Designed for X-type and hexcopter
  • Supports PWM ESC below 490hz
  • Suits PCM or 2.4Ghz radio systems
  • Compatible with windows XP, SP3, Windows 7
  • Flight modes: GPS, headless mode, intelligent orientation control, Hover and return to home.
  • Low voltage protection
  • Micro USB connectivity
  • Cell phone compatible

Working Voltage: Main controller 4.8V ~ 5.5V
LED/ Power Module: Input 7.4v - 6V (recommend 2S~6S LiPo) Output 2A @ 5V
Power Consumption: <2W
Working Temperature: 0C – 60c
Storage Temperature: -40C +60c
Hovering Tolerance: Horizontal level ±2m, vertical Level ±0.8m
Maximum Tilting Angle: 30°
Maximum Vertical Speed: 6m/s

Component Weights And Dimensions:
Main Controller Weight: 36g
GPS Compass Module Weight: 45g
LED Module Weight: 11g
PMU Module Weight: 18.53g
Main Controller: 55 × 38 × 17mm
GPS Compass Module: 64.50 × 11mm
LED Module: 25 × 23 × 10mm
PMU Module: 30 x 28 x 10mm

Package Contains:
Main Controller
GPS Compass Module
LED module
PMU module
Jumper cables
Fixtures and fittings
USB Cable